Showing all 7 results

Show sidebar

8” X 12” Mini Lathe Conversion Kit

Another popular candidate for CNC conversion is the 7” mini benchtop lathe. Mainly due to cost, this machine is an economical way to enter into CNC machining. The kit includes:
  • NEMA 23 stepper motors
  • Custom machine ball screws and nuts for each axis
  • Stepper motor adaptors
  • All new bearings
  • All new shaft connectors
  • All required hardware

Anodizing Aluminum

Anodizing Aluminum – we clean and prep your parts and anodize. Colors                     
  • Brilliant Red
  • Gray
  • Royal Blue
  • Black

Ball Nut Repair and Maintenance

$35.00
Ball nut repair and maintenance – we clean and inspect the ball nut to check for wear. We then fit new balls in the nut using oversize balls if necessary.

Ball Screw Machining

$25.00$55.00
We machine ball screws to your specifications. We also supply the ball screw if necessary.
  • Machining per end -  $55.00
  • Ball screw per ft.        $25.00  for 16mm

Grizzly G9972Z Lathe Conversion Kit

$750.00
Although the images and data that follow are for the G9972Z, the same concept can be used on virtually any benchtop lathe. Additional holes are required to be drilled and tapped and some modification on the X axis cross-slide is required. You will need access to a milling machine or local machine shop. The kit includes:
  • NEMA 34 stepper motor for the Z axis
  • NEMA 23 Stepper motor for the X axis
Custom machine ball screws and nuts for each axis Stepper motor adaptors All new bearings All new shaft connectors All required hardware

Sieg X2D Conversion Kit

$650.00
The Sieg X2D sold by The Little Machine Shop is very close to the X2. In fact, the conversion kit is the same except the table end plates are wider due to the bigger table and the ball screws are longer due to the extended travel on the X2D. It too is made in the same factory in China. https://makezine.com/2011/11/23/the-sieg-mini-mill-one-manufacturer-many-brands/ The CNC Conversions Plus Sieg X2D kit is the only true “bolt-on” kit on the market. You needn’t drill any additional holes or enlarge existing holes. All bearings (where possible) have grease fittings. The Z axis mounts to the center of the head placing the center of gravity where it belongs, in the center. This greatly reduces drag on the Z axis stepper motor and eliminates stalling. The conversion kit includes: (3) NEMA 23 stepper motor mounts (3) All new ball screws and nuts custom machined (3) All new shaft connectors All new thrust and tapered roller bearings All the necessary hardware to assemble to your machine